Research Products

2024

(J) Prinz, G.S., and Richards, P.W. (2024). “Experimental evaluation and design procedure for all-steel tube-in-tube buckling restrained braces.” ASCE Journal of Structural Engineering, 150(1). 

(J) Puttbach, C., Prinz, G.S., and Murray, C.D., (2024). “Strength and stiffness characterization of ultra high-performance concrete (UHPC) cement paste phases through in-situ micro-mechanical testing.” Cement and Concrete Composites, 149(2024),105520. 

(J) Puttbach, C., Prinz, G.S., and Murray, C.D., (2024). “Estimation of cement paste stiffness and UHPC elastic modulus through measured phase-property upscaling.” Cement, 17(2024) 100110. 

(J) Heymsfield, E., Murray, C.D., Salah, S., and Benitez Ortiz, F., (2024) “Evaluating the continuous deck placement sequence approach at steel bridges using a time-dependent numerical analysis.” J. Performance of Constructed Facilities, 38(5), 

(J) Aguilar, I., Soriano, E.O., and Murray, C.D. (2024) “Effect of citric acid on slump, compressive strength, and setting time of belitic calcium sulfoaluminate concrete” Magazine of Concrete Research, 76(5), p.217-228

2023

(J) Puttbach, C., Prinz, G.S., and Murray, C.D., (2023). “A review of existing equations for estimating elastic modulus in specialty concretes” ASCE J. Materials in Civil Engineering, 35(6)

(J) Chesnut, C.W. and Murray C.D. (2023). “Shear capacity of reinforced concrete made with BCSA cement” ACI Structural Journal, 120(1)

2022

(J) Lozano, C., Langston, M., Kashefizadeh, M-H., and Prinz, G.S. (2022). “Analytical and experimental investigation into pre-stressed carbon fiber reinforced polymer (CFRP) fatigue retrofits for steel waterway lock-gate structures.” Metals, 12(1), 88

(J) Castilla-Casadiego, D., Miranda-Munoz, K., Roberts, J., Crowell, A., Gonzalez-Nino, D., Choudhurry, D., Aparicio-Solis, F., Servoss, S., Rosales, A., Prinz, G.S., Zou, M., Zhang, Y., Coetzee, J., Greenlee, L., Powell, J., and Almodovar, J. (2022). “Biodegradable microneedle patch for delivery of meloxicam for managing pain in cattle.” PLoS ONE, 17(8): e0272169. 
(J) Dillard, R.J., Murray, C.D., Deschenes, R.A. “Belitic calcium sulfoaluminate cement subjected to sulfate attack and sulfuric acid.” Construction and Building Materials, 343, (2022). 
(J) Almohammedi, A., Murray, C.D., Dang, C.N., and Hale, W.M., “Practical ultra-high-strength concrete for precast concrete applications.” PCI Journal, 67, no.3 (2022). 
(J) Poblete, E.S., Messadi, T., Murray, C.D., and Zelinka, S. “Moisture Monitoring of a CLT Structure in a Southern Climate.” ASCE Journal of Architectural Engineering, 28, no. 3 (2022) 
(J) Almohammedi, A., Kareem, R., Dang, C., Marti-Vargas, J. and Hale, W. (2022). “Analytical Model for Predicting Prestress Transfer Bond Related Parameters of 18 MM Prestressing Strands”, Journal of Building Engineering 104709 
(J) Kareem, R., Alsalman, A., Dang, C., Marti-Vargas, J., and Hale, W. (2022). “Developing Sustainable Ultra-High Performance Concrete”, ACI Materials Journal 119 (3), 127 – 136. 
(J) Jones, C., Suraneni, P., and Hale, W. 2022. “Investigating Concrete Deterioration Due to Calcium Oxychloride Formation”, Construction and Building Materials 320, 125600. 
(J) Kareem, R., Alsalman, A., Dang, C., and Hale, W. 2022. “Prediction of Modulus of Elasticity of UHPC Using Maximum Likelihood Estimation Method”, Structures 35, 1308 – 1320. 

(J) Ortega Gonzalez, A.J., Barry, M.L., Murray, C.D. “Development of Underwater Mortar Using Belitic Calcium Sulfoaluminate Cement.” Advances in Civil Engineering Materials 11, no. 1 (2022). 

(J) Almohammedi, A., Dang, C.N., Murray, C.D., and Hale, W.M., “Enhanced Camber and Deflection Estimation for AASHTO Prestressed Concrete Girders.” PCI Journal [Accepted]. 

2021
(J) Gonzalez-Nino, D., Strasser, T., and Prinz, G.S. (2021). “Ultra low-cycle fatigue behavior comparison between additively manufactured and rolled 17-4PH (AISI 630) stainless steels.” Metals, 11(11), 1726.

(J) Prinz G.S., and Murray, C.D. (2021). “On the pullout strength of human nasal hair.” Materialia, 16(2021), 101102. [PlumX Metrics]

(J) Gonzalez-Nino, D., Sonntag, S., Afshar-Mohajer, M., Goss, J., Zou, M., and Prinz, G.S. (2021). “Micromechanical tension testing of additively manufactured 17-4PH stainless steel specimens.” J. Vis. Exp., (170)e62433: https://doi.org/10.3791/62433.

(J) Dominguez, D., and Prinz, G.S. (2021). “Cyclic behaviour of laterally skewed special moment frame connections having composite concrete slabs.” Steel Construction, 14(2021).
(J) Castilla-Casadiego, D.A., Carlton, H., Gonzalez-Nino, D., Miranda-Munoz, K., Daneshpour, R., Huitnik, D., Prinz, G.S., Powell, J., Greenlee, L., and Almodovar, J. (2021). “Design, characterization, and modeling of a chitosan microneedle patch for transdermal delivery of meloxicam as a pain management strategy for use in cattle.” Materials Science and Engineering C, 118(2021) 111544.
(J) Almohammedi, A., Dang, C.N., Murray, C.D., and Hale, W.M., “Investigation of measured prestress losses compared with design prestress losses in AASHTO Types II, III, IV, and VI bridge girders.” PCI Journal, 66, no. 3 (2021).
(J) Castilla-Casadiego, D.A., Carlton, H., Gonzalez-Nino, D., Miranda-Munoz, K., Daneshpour, R., Huitnik, D., Prinz, G.S., Powell, J., Greenlee, L., and Almodovar, J. (2021). “Design, characterization, and modeling of a chitosan microneedle patch for transdermal delivery of meloxicam as a pain management strategy for use in cattle.” Materials Science and Engineering C, 118(2021) 111544.
(J) Traore, F., Jones, C., Ramanathan, S., Suraneni, P., and Hale, W. 2021. “Using compressive strength and mass change to verify the calcium oxychloride threshold in cementitious pastes with fly ash”, Construction and Building Materials 296, 123640.
(J) Jones, C., LeBow, C., and Hale, W. 2021. “Investigating the Impact of Reducing the Cementitious Content in Bridge Deck Concrete”, Advances in Civil Engineering Materials 10 (1), 122 – 139.
(J) Floyd, R., Bymaster, J., Dang, C., and Hale, W. 2021. “Development Length of Prestressing Strands Cast in Lightweight Self-Consolidating Concrete”, Engineering Structures, 226:111393.
(J) Kareem, R., Dang, C., and Hale, W. 2021. “Flexural Behavior of Concrete Beams Cast with High Performance Materials”, Journal of Building Engineering 34:101912.
2020
(J) Kareem, R.S., Dang, C.N., Prinz, G.S., and Hale, W.M. (2020). “Structural performance of grade 830 steel in concrete bridge decks.” Structures, 27(2020), pp. 1396-1404.
(J) Hillhouse, B., and Prinz, G.S. (2020). “Effects of clustering and flange surface friction on headed shear stud demands.” Journal of Bridge Engineering (ASCE), 25(6).
(J) Khandel, O., Soliman, M., Floyd, R.W., and Murray, C.D., “Performance Assessment of Prestressed Concrete Bridge Girders using Fiber Optic Sensors and Artificial Neural Networks.” Structure and Infrastructure Engineering. May (2020)
(J) Cook, G.W., Murray, C.D., “Behavior of Reinforced Concrete Made with Belitic Calcium Sulfoaluminate Cement at Early Ages.” ACI Materials Journal 117, no. 1 (2020).
(J) Bowser, T.M., Murray, C.D., Floyd, R.W., “Bond Behavior of 0.6 in. (15.2 mm) Prestressing Strand in Belitic Calcium Sulfoaluminate (BCSA) Cement Concrete.” ACI Structural Journal 117, no. 1 (2020).
(J) Jones, C., Ramanathan, S., Suraneni, P., and Hale, W. 2020. “Calcium Oxychloride: A Critical Review of the Literature Surrounding the Formation, Deterioration, Testing Procedures, and Recommended Mitigation Techniques”, Cement and Concrete Composites 113:103663.
(J) Dang, C., Marti-Vargas, J., and Hale, W. 2020. “Bond mechanisms of 18 mm Prestressing Strands: New Insights and Design Applications”, Structural Engineering and Mechanics 76(1): 67 – 81.
(J) Kareem, R., Dang, C., Almohammedi, A., Marti-Vargas, J., and Hale, W. 2020. “Bond Model for 15.2-mm Strand with Consideration of Concrete Creep and Shrinkage”, Magazine of Concrete Research, 72(15), 799-810.
(J) Jones, C., Goad, D., and Hale, W. 2020. “Examining the soaking duration of coarse clay and shale lightweight aggregates for internal curing in conventional concrete”, Construction and Building Materials 249, 118754.
(J) Alsalman, A., Dang, C., Marti-Vargas, J., and Hale, W. 2020. “Mixture Proportioning of Economical UHPC Mixtures”, Journal of Building Engineering 27, 100970.